Product Details

Back

multi clamp shaft

Product Details
Product Name multi clamp shaft
Price USD 39.38
Shipping (Charge) International Shipping Fee
Shipping
Quantity
down up
Product List
Product Info Product Remove
Total(Qty) 0

Discounted amount of your subtotal will appear when you place your orders.

Wish List
Add to Cart
Checkout Backorder
Wish List
Sold Out
Wish List
Add to Cart
Checkout Backorder






The tire setter sold at the shopping mall. Tire setter premium 1.


It's installed on the product so that it can be processed in various ways.


These are option parts.

There's a 1.95mm hole in the center of the shaft that can be fitted with a mini sand dune screw.


There's a stop screw to fix the screw, so it's for mini sandpaper.


Screws and hexagonal shafts can be secured.




At the end of the shaft, the M2 tab is processed so that the screw doesn't come out.


It can be fixed and almost all parts can be fixed on the tire setter.


Because of this, it makes it possible to process various parts other than wheels.




The price of the tire setter could be burdensome because only the tires could be processed.


There were some, but you can use optional parts to process various parts.


It can be used as a very inexpensive and compact mini shelf.




Please use Bitam, which is sold at the shopping mall, for cutting processing.


I'm using the high-performance chip of "KYOCERA" made in Japan.


It's also good for plastic parts and metal products for mini sand dunes.


It shows the processing ability.


 


 

This is when the reinforced screw for mini sand dunes is processed.
"Beat arm 75' & 35'" Using the 45' part of the product,

The head of the screw can be processed into a plate shape.



Fix the M2 tap part and the stop screw firmly from the left and right.

It controls the shaking to the limit in a way that holds it down

Accurate processing is possible.




This is an enlarged picture after processing.


It looks very precise and clean.


The disadvantage was that it took too long to get in line.


The products on the ready-made day of the mini shelf can only be processed with a few reinforced screws.


If the weather gets dull quickly, or if it's at a 45-degree angle,


Since there was no day when it was made, the processing of the reinforced screw flat head was very...


It was a difficult task.


 


But the combination of the tire setter and the bit arm, at an accurate angle.

I process it when I get used to it.

It shows the processing speed that only takes tens of seconds.





This is a picture mounted on a plate.



This is a picture of a regular screw processed into a plate screw shape.


Compared to the regular screws, the size of the head part of the screw is...


Because it's small, you don't have to think deeply about the carbon plate.


The screw head is hidden to help improve the strength of the plate.



 

This is what it was used to remove gear resistance.
Using a hexagonal shaft and an aluminum spacer,

Fix it.



Pink crown gear is 30' beat arm.

The pink spur gear used a 46' bitarm.





This is what it was used to process pinion gears.


In this way, aluminum spacers


It can also be used for processing.




As shown in the picture below, there's also mortar processing.


You can use it.





Precautions for Products -




When you install this shaft, you can use the washer as shown in the picture.


Please make sure to wear it.








Product composition.

One multi clamp shaft.


1 stop screw for fixing parts (M3 x 4 mm)


One hexagon wrench for stopping.


One spacer for shaft pulley.


Part screws (M2 x 40mm plate) 2 pieces

Payment

We accept the following forms of payment:
- Account Transfer
- PayPal(Credit card)
- PayPal

Shipping

  • Shipping Method : Parcel Service
  • Shipping Area : A Region.
  • Shipping Cost : International Shipping Fee
  • Shipping Time : 7 - 20 days
  • About Shipping : Please take into consideration that some products may take additional time for delivery and processing.
    Important: Your order is shipped once your payment has been cleared. Please contact our customer service center if you would like to request an exchange or return on your order.

    - Customs and Duties

    The recipient will be held responsible for international shipments which may be subject to import duties and taxes. Please be advised that these charges are levied by the destination country and we do not have control over them. In the case that the recipient refuses to receive the parcel, the order will be returned to Korea and will not be re-shipped. Relevant expenses (round-trip shipping, customs, etc.) will be deducted from the refund.

Returns/Exchanges

1. Address for returns and exchanges:
- [04373] Seoul, Republic of Korea 813,48, Cheongpa-ro, Yongsan-gu,

2. Requirements:

Please take into consideration that we only accept qualifying returns but not exchanges. Refunds are issued once the returned products clear our inspection.

1) An item is eligible for cancellation if:
-you posted a Return request within 24 hours of payment and your order is still under “Pending” status (if your order is under “Preparing Shipment” status, please contact our customer service center) or
-the order is delayed for more than 10 days since payment and you have not received any notification regarding the delay; or
-the ordered item is out of stock.

2) We accept return(s) if:

-you receive a product different from your order; or

-you receive a defective product.

**Return Instructions

(1) Post a return request on our Return forum within three days of receipt. You are required to attach the photos of the received product(s) and include the item code, the order number, and the reason for the return.

(2) A customer service representative will be in contact to assist you by email or phone.

(3) Items returned must be in their original condition, which includes tags and any packaging. Also, you need to include a note of your order number, name, and user ID.

*Please be advised that returns are accepted ONLY IF you followed the instructions above and your return request has been approved by our staff. Returns that are shipped to us without any prior consent are not accepted.

*Please note that EVEN the defective/incorrect item(s) must be returned with all of the tags and labels intact. The item(s) must be sent in their original packaging and unworn.

*Please include all contents of the original package and free gifts (if applicable) in your return packaging.

* Shipping fee for any return caused by our fault will be paid by the company. However, if EMS’ cash on delivery is not possible then you can scan the return receipt and either mail it with the item to return or post an image of it on the forum. The shipping fee will be refunded once the returned item has arrived.

The following items are not considered defective:

* Items that are originally manufactured without tags or labels
* Items with creases that may have been made while shipping
* Items with unsatisfactory/incomplete finish due to mass production

4) If there is a missing item from your order:

*Contact our customer service center by phone or by forum (if you cannot reach us by phone) within 1 day of delivery.
*Please keep all contents of the original package including packaging material (boxes, plastic bags etc.) with you until you are instructed otherwise.

Please note that we may not be able to process the refund for your missing item if you lose or damage any packaging material.

Product Inquiry

Product Reviews

Write a Review See All

There are no posts to show

Product Q&A

Product Inquiry See All

There are no posts to show

Seller Info


HELP

070-8860-3242

OPEN am 10 ~ pm 4 (GMT+9) / LUNCH pm 12 ~ 1 (GMT+9) (weekend / holiday OFF!) ※ Time in South Korea

PAYMENT INFOMATION

AXES Payment

Virtual Online Account, Credit/Debit Cards supported by PayPal Payment with credit/debit card : (VISA, MASTER, JCB, AMEX etc.)

IBKOKRSE

ShinHan Bank : 53400899704014

Deposit Holder: Daekwang Industry Co., Ltd.

DELIVERY

EMS International shipping.

TRACK & TRACE

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
Close