M2X1.0 Screw Tap Processing Tool

(For machining plate thickness 1.5&3.0 mm only)

<Product description>

on bumper plates of 1.5mm and 3mm thickness.

It's a tool to make [female screws] straight.

If it is not processed vertically during tap processing, tightening force will be insufficient.

Prevents screws from loosening or splitting the plate.

It can reduce the number of parts in the vehicle, which is advantageous for weight reduction.

It helps to create a machine with a high degree of aesthetic completeness.

Holes in sizes 2,3,4,5,6mm can be extended.

It can be used for various gears, bearings, and tires.

<Caution>

It's a tool for drilling, so check the safety items in the manual carefully.

Please be careful of injuries when processing.

<How to use>

Supplies - Thread tapping tool, 1.6mm drill, tap M2X1.0, pin vise

Insert a 1.6mm drill blade into the tool and place the plate's

Check the location of the hole and drill the hole.

[The tool in the picture is N0.53 (for 3.0mm thickness)]

<Caution - Be careful not to pierce the 1.6 mm drill too hard.>

Insert the M2 tab into the tool to make the plate

Check the location of the 1.6mm hole and process the thread.

[It's easier to process if you apply oil to the screws on the tab]

Make a screw line by rotating it once and loosening it half way.

[Make sure that the arrow is inserted vertically]

5, Insert a shaft, bearing, etc. into each hole.

Engaging the tire wheels and gears

You can check the warping or tolerance of the parts.

Tabbed using the threaded tool

Example picture used.