2mm thick parts for mini sandals

It's a jig that you use to tap.

You can purchase a special handle separately with the screw in the picture below.

There is a tab for 2M inside the product.

If the functionality is degraded due to long-term use, it can be replaced.

Pass the parts to be processed to the handle chuck as shown in the picture below.

2mm hollow pipe, hollow shaft for axle, general shaft for axle

All available.

Hand over the parts strongly with the chuck-only handle.

As shown in the picture below, through the hole in the bottom of the part,

Apply oil to the tap screw.

(If not oiled, the tap screw may break or the shaft may break.)

Press with appropriate force in the direction of the arrow.

Like tightening a screw.

Turn the product clockwise.

The tab is complete.

<Example application>

The pillar where the damper is installed

Instead of the screw, the hexagon pipe.

By using a 2mm hollow pipe,

Makes the damper move smoother

Damper changes in vehicle movement

It makes it clear.

It's applied to the rear.

Applies to 72mm shafts to prevent wheel dislocation.

Can be used.