"Mini sand dune siomi sheet metal tire setter Premium1".
"Mini sand dune siomi sheet metal tire setter."In "Egleracing SP Tire Cutter V2",
This is a circular line that can be used.
The string and arm are fixed by welding.
It's an integral structure.
When cutting, heat is released to the side of the rock.
The processing duration is longer than that of the existing round rope.
The existing setter products are inexpensive because the rock part is made of sheet metal,
It's hard to prevent thermal deformation during welding, and the rock axis and the rope are
There was a problem that it was hard to maintain a right angle.
EX-ARM, which was made by NC milling,
Material selection or surface polishing processing that is not directly related to accuracy.
By reducing, the price of the product has been reasonably lowered.
Using a wider string than the existing one,
We have secured a processing area suitable for large-diameter tires.
Two 1.6mm spacers are included in the tire setter of another manufacturer.
You can adjust the height finely even when using it.
The string got thicker from 2.3mm to 5mm.
The total weight increases by 1.5 times, which occurs during processing.
It suppresses frictional heat.
The surface is coated with black melamine like the tire setter's color.
It shows a better sense of unity.
The direction of the blade of the rope is determined.
As shown in the picture, the direction of rotation from the bottom to the top...
Please set it up.
- Product composition. -
One EX for Joule am EX.
Two simple spacers for height adjustment.
- Precautions for products. -
The spacers are provided when using tiresets from other companies.
It's to match the height, so Xiumi tire setter.
You don't have to use it for products.
The factor that reduces the cutting power of the lateral part of the circular cord is
When the tire powder gets stuck between the string and the tire,
- When the wheel is deformed by pressure when the rope is pressed on the tire side,
When the line gets hot and the tire melts,
There are three main reasons for that.
Remove the residue and put pressure on the rope.
Use it without giving it. If the rope is hot,
Please lower it and process it again.