|Product Name||Bit arm (90 degrees / 30 degrees)|
|Shipping (Charge)||International Shipping Fee|
Discounted amount of your subtotal will appear when you place your orders.
"Mini sand dune Siomi sheet metal tire setter Premium1".
"Mini sand dune Siomi sheet metal tire setter."
In "Egleracing SP Tire Cutter V2",
It's a bit arm that you can use. With the existing string...
Wheels, aluminum, and plastic parts that could not be processed can be processed.
This is the installation of the Mini 4wd siomi Tire Setter Premium1.
By processing several times with a cutting amount of about 0.1mm to 0.5mm,
Clean surfaces can be finished.
If you process a lot at once, the motor is overloaded.
It causes failure.
The cutting bit, which has a big impact on the completeness of the process,
Using the Japanese "KYOCERA" product,
Not only plastic wheels, but also aluminum or brass.
It also shows excellent processing ability for metal processing.
If the blade becomes dull using a regular triangular double-sided chip,
You can use it after changing it 6 times.
It can be used for a long time.
If you change the blade position of the bit, the installation angle...
Since it's very important, on a flat plate like the picture,
Please assemble and install it horizontally.
We are currently selling two types of bit arms.
90' & 30'
horizontal processing of the wheel surface
- Remove the wheel lid and process it.
- Aluminum roller processing.
75' & 45'
- Screw head, plate, screw processing
Q: Lightening the gear.
The product is exclusively for our mini sand dune tire setter product.
Third-party tire setters are not available.
The models that we have actually confirmed for use are as follows.
"SIOMI Tire Setter Premium1 (Premium One)"
"SIOMI tire setter".
"Egleracing SP Tire Cutter V2".
It is the user's responsibility for damage during use for other purposes.
(How to install SIOMI tire setter without Y axis)
This is a picture of the bottom of the product installed by moving the slide.
It looks like it's equipped with a bit arm.
Adjust the amount of cutting by adjusting the bit arm back and forth.
Please activate the x-axis.
If you use a circular cord, use the original slide.
Please adjust it to the location and use it.
The fixing part of the string becomes farther away, causing shaking during processing.
When processing, the height of the blade of the bit arm is very important.
Install the bit arm as deep as possible on the fixing part.
It can be processed stably.
One beat arm.
Material: SECC (Black Stamp)
PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :